Summary. On the basis of the general laws of sulfur vulcanization diene rubbers the principles of the effective cross-linking using a multi-component agents was discussed. It is noted that the description of the mechanism of action of the complex cross-linking systems are complicated by the diversity of interactions of components and the influence of each of them on the curing kinetics, leading to a variety technological complications of real technology and affects on the quality and technical and economic indicators of the production of rubber goods. Based on the known theoretical approaches the system analysis of isothermal curing process was performed. It included the integration of different techniques and methods into a single set of. During the analysis of the kinetics of vulcanization it was found that the formation of the spatial grid parameters vulcanizates depend on many factors, to assess which requires special mathematical and algorithmic support. As a result of the stratification of the object were identified the following major subsystems. A software package for solving direct and inverse kinetic problems isothermal curing process was developed. Information support “Isothermal vulcanization” is a set of applications of mathematical modeling of isothermal curing. It is intended for direct and inverse kinetic problems. When solving the problem of clarifying the general scheme of chemical transformations used universal mechanism including secondary chemical reactions. Functional minimization algorithm with constraints on the unknown parameters was used for solving the inverse kinetic problem. Shows a flowchart of the program. An example of solving the inverse kinetic problem with the program was introduced. Dataware was implemented in the programming language C ++. Universal dependence to determine the initial concentration of the curing agent was applied . It allowing the use of a model with different properties of multicomponent curing systems. informed decisions.

isothermal curing, mathematical modeling, the scheme of the curing kinetics, informational software

1. Тихомиров С.Г., Битюков В.К., Подкопаева С.В., Хромых Е.А. и др. Математическое моделирование объектов управления в химической промышленности. Воронеж: ВГУИТ, 2011. 196 с.

2. Хаустов И.А. Управление синтезом полимеров периодическим способом на основе дробной подачи компонентов реакции // Вестник ТГТУ. 2014. № 4 (20) С. 787–792.

3. Хаустов И.А. Управление процессом деструкции полимеров в растворе на основе дробной загрузки инициатора // Вестник ВГУИТ. 2014. № 4. С. 86–91.

4. Битюков В.К., Хаустов И.А., Хвостов А.А. и др. Системный анализ процесса термоокислительной деструкции полимеров в растворе как объекта управления // Вестник ВГУИТ. 2014. № 3 (61). С. 61–66.

5. Карманова О.В. Физико-химические основы и активирующие компоненты вулканизации полидиенов: дисс. д-ра техн. наук. Воронеж, 2012.

6. Молчанов В.И., Карманова О.В., Тихомиров С.Г. Моделирование кинетики вулканизации полидиенов // Вестник ВГУИТ. 2013. № 1. С. 142–145.

7. Hardis R., Jessop J.L.P., Peters F.E., Kessler M.R. Cure kinetics characterization and monitoring of an epoxy resin using DSC, Raman spectroscopy, and DEA // Composite. 2013. Part A. V. 49. P. 100–108.

8. Javadi M., MoghimanM., Reza Erfanian M., Hosseini N. Numerical Investigation of Curing Process in Reaction Injection Molding of Rubber for Quality Improvements // Key Engineering Materials. 2011. V. 462–463. P. 1206–1211.