Obtaining a combined epoxy-acrylic dispersion
https://doi.org/10.20914/2310-1202-2021-1-278-283
Abstract
The current state of development of the economy of the Russian Federation causes the appearance of a number of urgent problems related to improving production and increasing the level of environmentally safe products, in particular paints and varnishes combined with high performance properties of coatings based on them. In this regard, the advantages and disadvantages of aqueous dispersions based on polymers in the presence of various modifiers that are widely used in the paint and varnish industry were analyzed. This article discusses the problem of stability conditions for mixed materials of epoxy-acrylic type and the establishment of a relationship between the composition of the film-forming base and the performance properties of coatings. The purpose of this study is to create new water-dispersion paints and varnishes based on mixed epoxy-acrylic film-formers for coatings with increased hardness, wear resistance, elasticity and adhesion. The analysis of the main types of water-based film-forming agents is carried out. It is proposed to use mixed systems of film-formers based on epoxy-acrylic dispersions. It was established by standard methods that by combining dispersions of acrylic and epoxy types it is possible to achieve a significant increase in the wear resistance of the compositions (almost 2 times) in comparison with the wear resistance of materials based on acrylic. The adhesion of coatings to substrates of various nature (except for brick) increases with an increase in the content of the epoxy component. In terms of performance, acrylic epoxy can be more effective than acrylic and can be used in humid environments. An increase in the performance properties of these materials in comparison with acrylate systems has been confirmed. It should be noted that an additional task in the development of any building materials is affordability. It is known that not all dispersions are cheap, for example, in the presence of silicone polymers, dispersions are expensive, so they are used only when necessary. To improve operational properties and reduce the cost of protective coatings, we proposed using composite materials, which included styrene-acrylic and epoxy aqueous dispersions. In the future, it is planned to create “smart” materials whose properties will depend on functional fillers.
About the Authors
R. G. DomnichenkoRussian Federation
senior lecturer, commodity science and examination of goods department, 20A Molodezhny sq., Luhansk, 91011, Luhansk People's Republic
G. Y. Vostrikova
Cand. Sci. (Chem.), associate professor, chemistry and chemical technology of materials department, 84, 20-letiya Oktyabrya str., Voronezh, 394006, Russia
S. S. Nikulin
Dr. Sci. (Engin.), chemistry and chemical technology of materials department, Revolution Av., 19 Voronezh, 394036, Russia
References
1. Khaletskiy V. Water-dispersive paints and varnishes based on acrylic polymers for mineral surfaces. 2014. (in Russian).
2. Horokhordin A.M., Horokhordin E.A., Rudakov O.B. Epoxy compositions in construction (review). Scientific Bulletin of VGASU. 2017. no. 1. pp. 14. (in Russian).
3. Yakovlev A.D. Chemistry and technology of paint and varnish coatings. Khimizdat, 2017. 446 p. (in Russian).
4. Jarray A., Gerbaud V., Hemati M. Polymer-plasticizer compatibility during coating formulation: A multi-scale investigation. Progress in Organic Coatings. 2016. vol. 101. pp. 195-206. doi: 10.1016/j.porgcoat.2016.08.008
5. Domnichenko R.G., Vostrikova G.Yu., Nikulin S.S. Obtaining epoxy-acrylic water-dispersion coatings. Chemistry, physics and mechanics of materials. 2019. no. 3 (22). pp. 14-22. (in Russian).
6. Ai D., Mo R., Wang H., Lai Y. et al. Preparation of waterborne epoxy dispersion and its application in 2K waterborne epoxy coatings. Progress in Organic Coatings. 2019. vol. 136. pp. 105258. doi: 10.1016/j.porgcoat.2019.105258
7. Xu S., Girouard N., Schueneman G., Shofner M.L. et al. Mechanical and thermal properties of waterborne epoxy composites containing cellulose nanocrystals. Polymer. 2013. vol. 54. no. 24. pp. 6589-6598. doi: 10.1016/j.polymer.2013.10.011
8. GOST 15140–78. Paints and varnishes. Methods for determining adhesion (with Amendments No. 1, 2, 3). (in Russian).
9. GOST 6806-73 (ST SEV 2546-80). Paints and varnishes. Method for determining the elasticity of the film in bending (with Amendments No. 1, 2). (in Russian).
10. GOST 24621-2015 (ISO 868: 2003). Plastics and ebonite. Determination of indentation hardness with a durometer (Shore hardness). (in Russian).
11. GOST 20811–75. Paints and varnishes. Abrasion test methods for coatings (with Amendments No. 1, 2, 3). (in Russian).
12. GOST 15088–2014. Plastics. Vicat method for determining the softening temperature of thermoplastics. (in Russian).
13. Wang Z., Han E., Liu F., Qian Z. et al. Waterborne epoxy nanocoatings modified by nanoemulsions and nanoparticles. Journal of Materials Science & Technology. 2014. vol. 30. no. 10. pp. 1036-1042. doi: 10.1016/j.jmst.2014.01.004
14. Saldivar-Guerrera E. Handbook of Synthesis, Characterization and Processing of organic Composites. John Wiley and Sons, 2013. 644 p.
15. Vostrikova G.Yu., Nikulina N.S., Dmitrenkov A.I., Filimonova O.N. et al. Prospects for the use of modified petroleum resin to improve the performance of wood materials. Industrial production and use of elastomers. 2016. no. 4. pp. 34–38. (in Russian).
16. Sokolov L.I. Processing and use of oily waste. Moscow, Infra-Engineering. 2017. 128 p. (in Russian).
17. Bulatov M.A. Complex processing of multicomponent liquid systems. Moscow, Mir. 2012. 304 p. (in Russian).
18. Nikulina N.S., Vostrikova G.Yu., Dmitrenkov A.I., Nikulin S.S. Modification of a low molecular weight copolymer from by-products of butadiene rubber production. Izvestia of higher educational institutions. Series: Chemistry and Chemical Technology. 2019. vol. 62. no. 1. pp. 114–119. (in Russian).
19. Girouard N., Schueneman G.T., Shofner M.L., Meredith J.C. Exploiting colloidal interfaces to increase dispersion, performance, and pot-life in cellulose nanocrystal/waterborne epoxy composites. Polymer. 2015. vol. 68. pp. 111-121. doi: 10.1016/j.polymer.2015.05.009
20. Nikulina N.S., Nikulin S.S. Copolymerization of unsaturated compounds contained in the distillation residue of the purification of the return solvent of polybutadiene production in the presence of aluminum chloride. Industrial production and the use of elastomers. 2013. no. 4. pp. 41–43. (in Russian).
21.
Review
For citations:
Domnichenko R.G., Vostrikova G.Y., Nikulin S.S. Obtaining a combined epoxy-acrylic dispersion. Proceedings of the Voronezh State University of Engineering Technologies. 2021;83(1):278-283. (In Russ.) https://doi.org/10.20914/2310-1202-2021-1-278-283