Computational experiment in creating a virtual design system for drum dryerswith a heat pump
https://doi.org/10.20914/2310-1202-2024-3-15-23
Abstract
One of the effective areas of research of real technological processes is the creation of virtual processes and its components. In the work, virtual computer models have been created that establish a connection between the mathematical model of the drying process and the simulated design of a two–section drum dryer equipped with an absorption water–ammonia heat pump. To simulate the drying process, a mathematical model based on differential equations of heat and mass transfer A.V. Lykov, algorithmic and software of the drying process were used and a single virtual system was created that allows simulating the drying process of cereals, oilseeds and legumes in a drum dryer in real time over a wide range of regime parameters. To conduct a computational experiment in one of the CAD systems, a three–dimensional visualization of a drum dryer was performed and a graphical shell of the LabVIEW environment was used with a set of all the tools necessary for data collection, analysis and presentation of the results obtained. 3D execution of the drum dryer in CAD (computer–aided design system) made it possible to simulate the real conditions of its operation, compare alternative options and select the best design solutions.
About the Authors
A. A. Shevtsov
Voronezh State University of Engineering Technologies
Russian Federation
Russian Federation
Dr. Sci. (Engin.), professor, fats technology, processes and apparatuses of chemical and food productions department, Revolution Av., 19 Voronezh, 394036, Russia
V. V. Tkach
The Air Force Academy named after the profes-sor N.E. Zhukovsky and Y. A. Gagarin
Cand. Sci. (Engin.), associate professor, 208 General professional disciplines department, Old Bolsheviks, 54a, Voronezh, 394064
References
1. Olennikov A.A., Tsymbal V.P., Sechenov P.A., Chapaev D.B. Simulation model for studying the drying process in fluidized bed devices. Heat engineering and informatics in education, science and production: collection of reports of the V All-Russian scientific. - practical. conf. students, graduate students and young scientists with international participation. Ekaterinburg, 2016. pp. 231-235. (in Russian).
2. Tkach V.V., Shevtsov A.A. Virtual test bench for computer design of drum dryers based on kinetic laws of the drying process. Bulletin of the Dagestan State Technical University. Technical sciences.2023. vol. 50. no. 1. pp. 152-160. (in Russian).
3. Ostrikov A., Vasilenko V., Poimanov V. Calculation and design of machines and equipment for food production. Litres, 2023. (in Russian).
4. Yunin V.A., Zakharov A.M., Kuznetsov N.N., Zykov A.V. Drying process of crushed plant material in a drum dryer. Izvestia NV AUK. 2020. Vol. 1. No. 57. Pp. 335–349. doi: 10.32786/2071–9485–2020–01–335 (in Russian).
5. Molchanov A.V., Dyachenko S.V., Shibitova N.V. Study of the drying process of bulk materials in a drum dryer. International Journal of Applied and Fundamental Research. 2015. no. 10–11. pp. 175–176. Available at: https://applied–research.ru/ru/article/view id=7415 (in Russian).
6. Ostrikov A.N., Shevtsov A.A., Tkach V.V., Serdyukova N.A. Optimization of the grain crop drying process in a drum dryer with a heat pump. News of universities. Food technology. 2018. no. 1. pp. 74–78. (in Russian).
7. Tkach V.V., Shevtsov S.A., Serdyukova N.A. Drum dryer. Patent RF, no. 2649379, 2018. (in Russian).
8. Larin A.A., Repin A.R., Gureev O.S. Heat pumps. Interuniversity collection of articles by competition laureates. 2022. pp. 117-119. (in Russian).
9. Gamayunov I.E. Energy-saving technologies in the process of grain drying. Student science - a look into the future. 2021. pp. 91-93. (in Russian).
10. Shevtsov A.A., Bunin E.S., Tkach V.V., Serdyukova N.A. et al. Efficient implementation of a vapor-compression heat pump in a complex processing line for oilseeds. Storage and processing of agricultural raw materials. 2018. no. 1. pp. 60–64. (in Russian).
11. Elistratov S.L. Evaluation of the boundaries of technical and economic efficiency of heat pumps. Bulletin of SUSU. Power Engineering Series. 2009. vol. 11. no. 15. pp. 72–78. (in Russian).
12. Use of heat pumps in the world – statistics, trends, prospects. Available at: vteple.xyz/ispolzovanie–teplovyihnasosov–v–mire (in Russian).
13. Shevtsov A.A., Tertychnaya T.N., Drannikov A.V., Zasypkin N.V., Kulikov S.S. Method for drying grain of cereal crops and installation for its implementation. Patent RF, no. 2765597, 2022.
14. Wang G., Wu W., Qiao F., Fu D. et al. Research on an electric energy‐saving grain drying system with internal circulation of the drying medium. Journal of Food Process Engineering. 2020. vol. 43. no. 9. pp. e13476.
15. Jimoh K.A. et al. Recent advances in the drying process of grains. Food Engineering Reviews. 2023. vol. 15. no. 3. pp. 548-576.
16. Chojnacka K., Mikula K., Izydorczyk G., Skrzypczak D. et al. Improvements in drying technologies-Efficient solutions for cleaner production with higher energy efficiency and reduced emission. Journal of Cleaner Production. 2021. vol. 320. pp. 128706.
17. Shevtsov A.A., Pavlov I.O., Voronova E.V., Britikov D.A. Decomposition analytical study of a multiparameter grain drying and storage system using a heat pump. Control Systems and Information Technologies. 2011. no. 4. pp. 90–94. (in Russian).
18. Chernyshov A.D. Improving the differentiability of solutions to boundary value problems of mechanics in the form of generalized Fourier series using boundary functions. Izvestiya RAS. Mechanics of Solids. 2010. no. 1. pp. 151–162. (in Russian).
19. Shevtsov A.A., Lytkina L.I., Tkach V.V., Chernukhin Yu.V. et al. Modeling of heat treatment of oilseeds with a high-temperature coolant. Storage and processing of agricultural raw materials. 2018. no. 4. pp. 163–171. (in Russian).
20. Tkach V.V., Shevtsov A.A., Serdyukova N.A. Computer modeling of thermophysical characteristics of rapeseed by the method of non-stationary thermal regime. Science, education and innovation in its modern form: materials of the National scientific and practical. conf. Voronezh, Voronezh State Agrarian University named after Emperor Peter I, 2018. pp. 199–204. (in Russian).
Review
For citations:
Shevtsov A.A., Tkach V.V. Computational experiment in creating a virtual design system for drum dryerswith a heat pump. Proceedings of the Voronezh State University of Engineering Technologies. 2024;86(3):15-23. (In Russ.) https://doi.org/10.20914/2310-1202-2024-3-15-23
Views:
232
Email this article 
Post a Comment 
