Preview

Proceedings of the Voronezh State University of Engineering Technologies

Advanced search

DEVELOPMENT OF TECHNOLOGICAL SOLUTIONS FOR THE BEVERAGE INDUSTRY PREVENTIVE ORIENTATION

https://doi.org/10.20914/2310-1202-2014-2-124-128

Abstract

Summary. Market demand for foods with low fat content has been expanding, but for low-fat foods good organoleptic properties need new food ingredients and solutions. Food hydrocolloids, polysaccharides and milk proteins, now are widely used in various industries, including the dairy industry, performing various functions: to thicken aqueous solutions, foaming and stabilizing foams and others. We studied the functional and technological properties and developed technology of new types of oxygencontaining beverages (smoothies) on the basis of cheese whey, natural fruit and berry juices and purees and dietary fibres «Citri-Fi», including non-starch polysaccharides (guar gum and xanthan gum), contributing to the formation of a specific texture and drink as stabilizers oxygen foam. When creating new kinds of smoothies performed construction flavored beverage profile, the definition of rational parameters of preparation and entering dietary fibres; selection of the optimal concentration of dietary fiber for the formation of the desired consistency (texture) drink; study of quality and safety of new types of drinks and justification expiration dates. Based on the studies found that the use as stabilizers structure oxygen smoothie dietary fibres «Citri-Fi» in concentrations of 0.8 – 1 % and non-starch polysaccharides at concentrations of 0.1 - 0.3 % contributes to the production of foams drinks with a sufficiently high magnification. Increasing the dose of dietary fibres in making smoothies viscosity increases and weighting system, drink bad whipped, there is separation of the product into phases, the system becomes thermodynamically unstable. Production technology and recipes for new types of smoothies with dietary fibres. Preventive orientation developed oxygenated drinks allows to include them in the diet of patients with chronic heart failure, which is confirmed by appropriate investigations.

About the Author

N. V. Nepovinnykh
Saratov State agrarian university named after N.I. Vavilov
Russian Federation
Associate Professor
Department of technology of production and processing of livestock products
phone 8-917-209-309-4


References

1. Кочеткова А.А., Грызлова В.В., Филатова И.А. Смуси нового поколения // Пищевая промышленность. 2013. № 3. С. 8-13. Kochetkova A.A., Gryzlova V.V., Filatova I.A. Smoothie new generation. Pivo i napitki. [Food and Beverage], 2013, no. 3, pp. 8-13. (In Russ.).

2. Птичкин И.И., Птичкина Н.М. Пищевые полисахариды: структурные уровни и функциональность. Саратов: ГУП «Типография № 6», 2012. 96 с. Ptichkin I.I., Ptichkina N.M. Pishchevye polisaharidy: srukturnye urovni i funktsionalnost’ [Food polysaccharides: structural levels and functionality]. Saratov, Tipografiia № 6, 2012. 96 p. (In Russ.).

3. Шестопалова Н.Е. Волокна «Citri-Fi» - залог качества продукции // Кондитерское и хлебопекарное производство. 2010. № 5-6. С. 42. Shestopalova N.E. Fibres «Citri-Fi» - a deposit product quality. Konditerskoe i khlebopekarnoe proizvogstvo. [Confectionery and bakery production], 2010, no. 5-6, pp. 42. (In Russ.).

4. Ипатова Л.Г. Научное обоснование и практические аспекты применения пищевых волокон при разработке функциональных пищевых продуктов: автореф. дис. … докт. техн. наук: 05.18.15. М.: МГУТУ, 2011. 364 с. Ipatova L.G. Nauchnoe obosnovanie i prakticheskoe primenenie pishchevykh volokon pri razrabotke funktsionalnykh pishchevykh productov. Diss. doct. tekhn. nauk [Scientific basis and practical aspects of dietary fiber in the development of functional foods. Dr. tech. sci. diss.]. Moscow, 2011. 364 p. (In Russ.).

5. Антипова Л.В., Воронкова Ю.В. Разработка рецептуры фаршей мясных с применением пищевых волокон Ecolight native // Вест- ник ВГУИТ. 2013. № 4. С. 111-114. Antipova L.V., Voronkova L.V. Development the formulation of minced meat with the use of dietary fiber ecolight native. Vestnik VGUIT. [Bulletin of VSUET], 2013, no. 4, pp. 111-114. (In Russ.).

6. Добровольский В.Ф. и др. Разработка обогащенных зерновых экструдированных продуктов // Пищевая промышленность. 2012. № 5. С. 20-21. Dobrovol’skii V.F. et al. Development of enriched grain extruded products. Pivo i napitki. [Food and Beverage], 2012, no. 5, pp. 20-21. (In Russ.).

7. Остроумова Т.Л., Просеков А.Ю. Влияние белковых веществ на пенообразующие свойства молока // Известия вузов. Пищевая технология. 2007. № 2. С. 43 – 46. Ostroumova T.L., Prosekov A.Iu. The influence of proteins on the foaming properties of milk. Izvestiia vuzov. Pishchevaia tekhnologiia. [Proceedings of the universities. Food technology], 2007, no. 2, pp. 43 - 46. (In Russ.).

8. Неповинных Н.В., Грошева В.Н., Птичкина Н.М. Использование биополимеров для стабилизации белковой кислородной пены // Вестник ВГУИТ. 2013. № 4. С. 197-199. Nepovinnykh N.V., Grosheva V.N., Ptichkina N.M. Using biopolymers to stabilize the protein oxygen foam. Vestnik VGUIT [Bulletin of VSUET], 2013, no. 4, pp. 197-199. (In Russ.).

9. Родионова Н.С., Глаголева Л.Э., Климова Е.А. Определение параметров процесса набухания компонентов комплексной добавки для производства кислородного коктейля // Хранение и переработка сельхозсырья. 2012. № 6. С. 61-62. Rodionova N.S., Glagoleva L.E., KlimovaE.A. Determination of parameters of the swelling process components of a comprehensive supplement for the production of oxygen cocktail. Khranenie i pererabotka sel’khozsyr’ia. [Storage and processing of agricultural], 2012, no.6, pp. 61-62. (In Russ.).

10. Мачехина Ю.А. Реометрия пищевого сырья и продуктов: справочник. М.: Агропромиздат, 1990. 271 с. Machekhina Iu.A. Reometria pishchevogo syr’ia i productov [Rheometry of food raw materials and products]. Moscow, Agropromizdat, 1990. 271 p. (In Russ.).


Review

For citations:


Nepovinnykh N.V. DEVELOPMENT OF TECHNOLOGICAL SOLUTIONS FOR THE BEVERAGE INDUSTRY PREVENTIVE ORIENTATION. Proceedings of the Voronezh State University of Engineering Technologies. 2014;(2):124-128. (In Russ.) https://doi.org/10.20914/2310-1202-2014-2-124-128

Views: 712


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2226-910X (Print)
ISSN 2310-1202 (Online)