Effect of quaternary ammonium salts in the process of extracting oil filled rubber from latex
https://doi.org/10.20914/2310-1202-2016-1-164-166
Abstract
Currently, much attention is paid to the improvement of production technology of synthetic rubber. Much attention is given to rubber is produced by emulsion polymerization. This is due to the fact that rubbers produced by emulsion polymerization have a number of positive characteristics, and are widely used in the tire and rubber industry, in composite formulations for various purposes. In recent years, the technology of production of synthetic rubbers are widely used quaternary ammonium salts which are produced on an industrial scale. Application low and high molecular weight quaternary ammonium salts to reduce pollution of environ-mental protection, exclude the use of mineral salts without significant changes in the process flowsheet. It is found that quaternary ammonium salts react with the components of the emulsion system to form insoluble complexes, which are captured produced rubber crumb. However, Applications, quaternary salts in the manufacture of oil-filled rubber in the literature sources have not been given due attention. The study presents the results of research on the effect of the concentration of a coagulating agent, tempera tours and concentration of the dispersed phase in the process of coagulation of latex in the preparation of oil-filled rubber stamps SCS-30 ARKM-15. The concentration of the coagulating agent does not significantly affect the process of separation of the rubber from the latex. The process of isolation rubber latex is advantageously carried out at a reduced temperature. The concentration of the dispersed phase also provides material effect on the coagulation process. The lead researches mouthestablished that produced rubber, rubber compounds and vulcanizates based on these indicators correspond to their requirements.
About the Authors
N. S. NikulinaRussian Federation
Cand. tech. sci., Department of Fire Safety of technological processes. phone 89507661515
E. V. Romanyuk
Russian Federation
associate professor, Department of Fire Safety of technological processes. phone 89507661515
S. S. Nikulin
Russian Federation
professor, Department of engineering ecology and technogenic safety. phone (473) 249-60-24
References
1. 1 Nikulina N.S. Prospects. Voronezhskii vestnik institute GPS MChS [Voronezh Gazette GPS MCHS Russia Institute], 2013, no. 2 (7), pp. 7-10. (In Russ.).
2. Nikulina N.S., Stadnik L.N., Pugacheva I.N., Nikulin S.S. Disposal of waste products of polybutadiene containing 4-vinylcyclohexene. Khimiya v interesakh ustoichivogo razvitiya [Chemistry for Sustainable Development], 2015, no. 1, pp. 49-53. (In Russ.).
3. 3 Poyarkova T.N., Nikulin S.S., Pugacheva I.N. and others. Praktikum po kolloidnoi khimii lateksov [Workshop on latex colloid chemistry]. Moscow, Academiya estestvoznaniya, 2011. 124 p. (In Russ.).
Review
For citations:
Nikulina N.S., Romanyuk E.V., Nikulin S.S. Effect of quaternary ammonium salts in the process of extracting oil filled rubber from latex. Proceedings of the Voronezh State University of Engineering Technologies. 2016;(1):164-166. (In Russ.) https://doi.org/10.20914/2310-1202-2016-1-164-166