Preview

Proceedings of the Voronezh State University of Engineering Technologies

Advanced search

Investigation of the quality of Arctic diesel fuel imported to the Republic of Sakha (Yakutia)

https://doi.org/10.20914/2310-1202-2018-3-358-361

Abstract

The results of experimental studies of the quality of Arctic diesel fuel taken from various gas stations of the Republic of Sakha (Yakutia) are shown. The main operational characteristics of Arctic diesel fuel are investigated. The work was carried out in the laboratory of the department "General, analytical and physical chemistry". Taken diesel fuel by geographic location is divided into 3 parts: central, northern and district. From each region, 3 samples of Arctic diesel fuel were taken from various gas stations. The study found that the selected main indicators of diesel fuel: density, viscosity, fractional composition and low-temperature characteristics – differ from the normative values. The worst results were shown by diesel fuel samples from the northern part of the Republic of Sakha (Yakutia). Samples of arctic diesel fuel taken from the central part and district, generally meet the quality standards of GOST 305-82, but for low-temperature characteristics, do not meet the standard.

About the Author

E. L. Iovleva
North-Eastern Federal University named after M.K. Ammosov
Russian Federation
Cand. Sci. (Engin.), associate professor, Mechanical Engineering department, Belinskogo Av., 58 Yakutsk, 677000, Russia


References

1. Nosova E.V., Saprygina V.N. Experimental study of the quality of diesel fuel. Vestnik IrGTU [Vestnik IrSTU]. 2011. no. 6 (53). pp. 69–72. (in Russian)

2. Belyanin B.V., Erich V.N. Tekhnicheskij analiz nefteproduktov i gaza [Technical analysis of oil products and gas]. Leningrad, Chemistry, 1975. 336 p. (in Russian)

3. Akhmetov SA Deep processing of oil. Ufa, 2002. 453 p. (in Russian)

4. Dehterman A. Sh. Oil refining in the fuel variant Moscow: Chemistry, 1988. 96 p. (in Russian)

5. Musina G.S., Linkova T.S., Khabibrakhmanov O.V. Development of high-tech production of high-octane components of motor fuel from renewable vegetable raw materials. Vestnik VGUIT [Proceedings of VSUET]. 2018. no. 2. pp. 264-269. doi: 10.20914/2310-1202-2018-2-264-269 (in Russian)

6. Brando L., Suarez P. Determination of the alternative butanol/gasoline and butanol/diesel fuel blends heats of combustion by a heat-loss compensated semi-microcalorimeter. Journal of thermal analysis and calorimetry. 2018.vol. 132. no. 3. pp. 1953-1960.

7. Soldi R.A., Oliveira A.R.S., Barbosa R.V., Cesar-Oliveira V.A.F. Polymethacrylates: Pour point depressants in diesel oil.?European Polymer Journal. 2007. vol. 43. no. 8. pp. 3671-3678. doi: 10.1016/j.eurpolymj.2006.07.021

8. Danilov A.M., Shevchenko E.B. On the production of diesel fuels in accordance with the regulations of the Customs Union. Dvigatelestroenie [Engine building]. 2012. no. 4. pp. 42-44. (in Russian)

9. Zinina N.D., Timashova A.L., Pavlovskaya M.V., Grishin D.F. Antiwear additive for diesel fuel with ultra low sulfur content. Neftekhimiya [Petrochemistry]. 2014. vol. 54. no. 5. pp. 399. (in Russian)

10. Tatarov L.G., Stepanidina O.N., Tarasov Yu.S. Diesel quality. Vestnik Ul'yanovskoj gosudarstvennoj sel'skohozyajstvennoj akademii [Bulletin of the Ulyanovsk State Agricultural Academy]. 2008. no. 1 (6). pp. 57-59. (in Russian)

11. Iovleva E.L., Zaharova S.S., Lebedev M.P., Popova L.I. Prospects for improving the low-temperature characteristics of diesel fuel fractions. Vestnik Saratovskogo gosudarstvennogo tekhnicheskogo universiteta [Bulletin of the Saratov State Technical University]. 2013. vol. 2. no. 2 (71). pp. 116-120. (in Russian)

12. Ishkov A.M., Iovleva E.L. The effect of fuel quality on the reliability of diesel engines in the north. Nauka i obrazovanie [Science and education]. 2015. no. 1 (77). pp. 65-70. (in Russian)


Review

For citations:


Iovleva E.L. Investigation of the quality of Arctic diesel fuel imported to the Republic of Sakha (Yakutia). Proceedings of the Voronezh State University of Engineering Technologies. 2018;80(3):358-361. (In Russ.) https://doi.org/10.20914/2310-1202-2018-3-358-361

Views: 567


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2226-910X (Print)
ISSN 2310-1202 (Online)