Now the increasing popularity is received by food semi-finished products from the bulk materials. With increase in volume of their production it is expedient to mix powdery materials in the mixers of continuous action. For the set working hours of the mixers of continuous action the movement of material in the device is considered to be casual stationary processes between which there is relationship of cause and effect. Key indicators for her assessment is the correlation coefficient, population mean and dispersion. Communication between entering and going out of the device signals is established by means of the equations of material balance, describing expenses of streams of bulk stochastic stationary functions X (t). Further, finding probabilistic characteristics of the entering and leaving signals, it is possible to judge "quality" of operation of the mixer or to select the required topology of streams in the hardware environment by comparison of the relations of their dispersions or mean square deviations. In this work the scheme of the movement of material streams in the mixer developed by us realizing a method of "consecutive dilution" is considered. By means of the system of the equations of the material balance displaying process of the movement of material in the mixers of continuous action of vibration type influence of recirculation on the smoothing properties of the device is considered. Values of size of the smoothing ability of S from recirculation coefficient ? and quantities of rounds of n are given. It is revealed that increase in the smoothing ability leads to increase of quantity of rounds, and respectively and dimensions of the mixers of continuous action of vibration type, therefore, it is expedient to use the mixer with quantity of rounds equal 6 and coefficient of recirculation equal 0.7 as at the same time the smoothing ability equal is enough 1753 for receiving qualitative ready mix at a ratio of components 1:50. By means of the correlation analysis it is possible to predict uniformity of a material stream at the device exit at the known values of the time spent in him of material, coefficients of recirculation and dispersion of an entrance signal.

mixer, bulk materials, consecutive dilution, correlation analysis, mathematical model

1. Dubey A. Powder flow and blending. Predictive Modeling of Pharmaceutical Unit Operations. 2017. pp. 39–69.

2. Nikolaev V.N., Fetisov E.O., Zyazev E.V. Analysis of vibration mixers of loose forages. Innovacii, tekhnologii, nauka [Innovation, technology, science: a collection of articles of the international scientific-practical conference]. 2015. pp. 302. (in Russian)

3. Korobchuk M.V., Verigin A.N., Dzhangiryan V.G., Fadeyev D.V., Abdullin I.A. Modern mixing equipment for preparation of multicomponent power saturated compositions. Vestnik Kazanskogo tekhnologicheskogo universiteta [Bulletin of the Kazan technological university]. 2013. pp. 240–243. (in Russian)

4. Lyashenko V.S. Review and analysis of mixers for bulk feed. Vestnik Omskogo gosudarstvennogo agrarnogo universiteta [Bulletin of Omsk State Agrarian University]. 2015. pp. 56–60. (in Russian)

5. Pushko V.A., Boyko I.G. The prospects of use of the mixing equipment of vibration type in the conditions of innovative formula-feed production. Vestnik VNIIMZh [Messenger of VNIIMZh]. 2017. no. 1 (25). pp. 78–82. (in Russian)

6. Ivanets V.N., Borodulin D.M., Shyshpannikov A.B., Sukhorukov D.V. Intensification of bulk material mixing in new designs of drum, vibratory and centrifugal mixers. Foods and Raw Materials. 2015. vol. 3. no. 1. pp. 62–69.

7. Rogers A., Lerapetritou M.G. Discrete element reduced?order modeling of dynamic particulate systems. American Institute of Chemical Engineers Journal. 2014. no. 60. pp. 3184–3194.

8. Sen M., Dubey A., Singh R., Ramachandran R. Mathematical Development and Comparison of a Hybrid PBM-DEM Description of a Continuous Powder Mixing Process. Journal of Powder Technology. 2013. pp. 1-11.

9. Selivanov Yu.T., Polyakov B.E. Optimization of the process of mixing bulk materials in continuous mixers. Matematicheskie metody v tekhnike i tekhnologiyakh - MMTT-27 [Mathematical methods in equipment and technologies -MMTT-27: Proceedings of the XXVII International Conference]. Tambov, 2014. vol. 1. pp. 66-69. (in Russian)

10. Ilinykh G. V., Ustyantsev E.A., Weismann Ya.I. Creation of material balance of the line of manual sorting of municipal solid waste. Ehkologiya i promyshlennost' Rossii [Ecology and industry of Russia]. 2013. no. 1. pp. 22-25. (in Russian)

11. Kiselyov D.I., Kozymayev A. S Influence of the organization of the directed movement of material streams in a centrifugal shnekovom the mixer. Pishchevye innovacii i biotekhnologii[Food Innovation and Biotechnology: Proceedings of the International Scientific Conference]. Kemerovo, 2015. pp. 159-161.

12. Bakin M.V., Kapranova A.B., Verloka I.I. Modern methods of the mathematical description of process of mixing of bulks. Fundamental'nye issledovaniya [Basic researches]. 2014. no. 5. pp. 923-927. (in Russian)

13. Shyshpannikov A.B., Zorina T.V., Shyshpan-nikov E.A., Shyshpannikova A.S. Vibracionnyj smesitel' [Vibration mixer]. Patent RF, no. 2626415, 2017.

14. Fedorovich V.A., Mitsyk A.V. Mathematical Simulation of Kinematics of Vibrating Boiling Granular Medium at Treatment in the Oscillating Reservoir. Key Engineering Materials. 2014. vol. 581. pp. 456-461.

15. Borodulin D.M., Ratnikov S.A., Kozymayev A. S., Andryushkova E.A. et al. Modeling of the movement of material streams in a centrifugal shnekovom the mixer. Vestnik Krasnoyarskogo gosudarstvennogo agrarnogo universiteta [Bulletin of the Krasnoyarsk state agricultural university]. 2015. no. 1. pp. 102-108. (in Russian)