The article is devoted to the mathematical modeling of the kinetics of ethyl benzene dehydrogenation in a two-stage adiabatic reactor with a catalytic bed functioning on continuous technology. The analysis of chemical reactions taking place parallel to the main reaction of styrene formation has been carried out on the basis of which a number of assumptions were made proceeding from which a kinetic scheme describing the mechanism of the chemical reactions during the dehydrogenation process was developed. A mathematical model of the dehydrogenation process, describing the dynamics of chemical reactions taking place in each of the two stages of the reactor block at a constant temperature is developed. The estimation of the rate constants of direct and reverse reactions of each component, formation and exhaustion of the reacted mixture was made. The dynamics of the starting material concentration variations (ethyl benzene batch) was obtained as well as styrene formation dynamics and all byproducts of dehydrogenation (benzene, toluene, ethylene, carbon, hydrogen, ect.). The calculated the variations of the component composition of the reaction mixture during its passage through the first and second stages of the reactor showed that the proposed mathematical description adequately reproduces the kinetics of the process under investigation. This demonstrates the advantage of the developed model, as well as loyalty to the values found for the rate constants of reactions, which enable the use of models for calculating the kinetics of ethyl benzene dehydrogenation under nonisothermal mode in order to determine the optimal temperature trajectory of the reactor operation. In the future, it will reduce energy and resource consumption, increase the volume of produced styrene and improve the economic indexes of the process.

dehydrogenation of ethylbenzene, adiabatic reactor, chemical kinetics, a mathematical model, reaction rate constant

1. Tekhnologicheskii reglament proizvodstva stirola na OAO “Nizhnekamskneftekhim” [Technological regulation of styrene manufacture on Open Joint Stock Company "Nizhnekamskneftekhim"], 1980. (In Russ.).

2. Ostrovskii G.M., Volin Yu.M. Modelirovanie slozhnykh khimiko-tekhnologicheskikh skhem [Modeling of complex chemicalengineering schemes], Moscow, Khimiya, 1975. pp. 292-297. (In Russ.).

3. Alekseev M.V., Popov A.P., Zhatova I.A. Mathematical model development of ethylbenzene dehydrogenation dynamics to styrene production. Sbornik trudov XXVII mezhdunarodnoi nauchnoi konferentsii MMTT-27 [Collection of Works XXVII International Scientific Conference MMTT-27.: in 12 v]. Tambov: TGTU, 2014, vol. 2, pp. 12. (In Russ.).

4. Studopediya proizvodstvo butadiene-1,3 degidrirovaniem butana [Studopediya. Production of 1,3-butadiene by n-butane dehydrogenation [electronic resource]. Available at: http: // studopedia.ru/ 3_38394_proizvodstvo butadiene degidrirovani-emn-butana.html. (In Russ.).

5. Kholokhonova L.I., Korotkaya E.V. Kinetika khimicheskikh reaktsii [Kinetics of chemical reactions]. Kemerovo, KemTIPP, 2004. pp. 4-11. (In Russ.).

6. Pushkareva T.P., Peregoudov A.V. Matematicheskoe modelirovanie khimicheskikh protsessov [Mathematical modeling of chemical processes]. Krasnoyarsk, 2013. pp. 22-25. (In Russ.).

7. Vasil'ev F.P. Metody optimizatsii [Optimization methods]. Moscow, Factorial Press, 2002. pp. 310-316. (In Russ.).

8. Kirpichnikov P.A., Beresnev V.V., Popova L.M. Al’bom tekhnologicheskikh skhem osnovnykh proizvodstv promyshlennosti sinteticheskogo kauchuka [Album of basic synthetic rubber industry manufactures]. Leningrad, Khimiya 1986. pp. 98-100. (In Russ.).

9. Bashkatov T.V., Zhigalin Ya.L. Tekhnologiya sinteticheskogo kauchuka [Synthetic Rubber Technology]. Leningrad, Khimiya, 1987. pp.121. (In Russ.).