Designing of chemical destination requires developers’ particular, careful approach, as malfunctions are dangerous for the whole area in which the facility is located. Efficient and uninterrupted operation of a chemical entity assumes certain tasks, and at the design stage, and during the construction, reconstruction, repair, and maintenance. When designing a crucial question: placing equipment in the technological scheme (nature and the order and connection of separate devices); determine the input parameters of raw materials; establishment of technological parameters of the system; determine the structural characteristics of the devices of the system; selection of process parameters in devices that affect the speed of the process, output and product quality. The main document containing the requirements of industrial safety, chemical and other dangerous objects is the Federal Law of July 21, 1997 № 116-FZ "On industrial safety of hazardous production facilities", as amended on December 31, 2014. It defines and regulates the framework for ensuring the safe operation of hazardous production facilities. The most important part in the development and design of hazardous chemicals is the examination of industrial safety, which is held on the basis of the principles of independence, objectivity, comprehensiveness and completeness of the research carried out by using modern science and technology. Design of chemical facilities is a complex, multifactorial and time-consuming process, which should be regarded as a series of socio-organizational and engineering stages. It is a systematic approach to solving design problems and control of all stages of the life cycle of chemical facilities will provide a high level of safe operation of industrial facilities.

chemical industry, engineering, hazardous production facilities, accident, production control

1. Marinina L.K.,Vasin A.Ya., Toropov N.V. Bezopasnost’ truda v khimicheskoi promyshlennosti [Safety in the chemical industry]. Moscow: Academy, 2006. 528 p. (In Russ.).

2. Shlender P.E., Maslova V.M., Podgaetskii S.I. Bezopasnost’ zhiznedeyatel’nosti [Safety]. Moscow: Vuzovskii uchebnik, 2007. 208 p. (In Russ.).

3. FZ ot 21.07.1997 №116FZ “O promyshlennoi bezopasnosti ob”ektov [”Federal law of July 21, 1997 No. 116-FZ "on industrial safety of hazardous production facilities", with amendments as of 31 December, 2014. The Official Internet portal of legal information]. Available at:www.pravo.gov.ru. (In Russ).

4. Zhuchkov V. A., Shabanov, I. E., Chernetskaya A. A., SmolkoYu.N. Mathematical modeling of heat mass transfer processes in the anaerobic digestion reactor. Vestnik VGUIT. [Bulletin of the Voronezh state University of engineering technologies], 2013, no. 4 (58), pp. 50-55. (In Russ.).

5. Proekt ukaza prezidenta RF “Ob utverzhdenii Osnov gosudarstvennoi politiki RF v sfere obespecheniya promyshlennoi bezopasnosti do 2015” [The Draft decree of the President of the Russian Federation "On approval The basics of the state policy of the Russian Federation in the sphere of industrial safety for the period up to 2015 and beyond" The Official Internet portal of legal information]. Available at: www.pravo.gov.ru. (In Russ.).

6. Polozhenie o litsenzirovanii deyatel’nosti po provedeniyu ekspertizy promyshlennoi bezopasnosti [Regulations on the licensing of examination of industrial safety (app. RF Government Decree of 4 July 2012 n 682, as amended on May 21, 2014). The Official Internet portal of legal information]. Available at: www.pravo.gov.ru. (In Russ.).

7. Postanovlenie pravitel’stva RF “O sostave razdelov proektnoi dokumentatsii i trebovaniyakh k ikh soderzhaniyu” [RF Government Resolution dated February 16, 2008 N 87 "On the part of sections of project documentation and requirements to their content" (with changes and additions). The Official Internet portal of legal information]. Available at: www.pravo.gov.ru. (In Russ.).