Forecasting the development of technological processes for the leading equipment of a wheat flour bread production line
https://doi.org/10.20914/2310-1202-2025-4-29-35
Abstract
The bakery industry is one of the most historically significant, with a history dating back many hundreds of years. At the same time, it is also the most controversial, in which, along with automation and robotics, there is still a lot of manual labor, which negatively affects the entire industry. And in order to increase the competitiveness of this industry, it is necessary to modernize some technological stages of production and the entire technological process, which requires the introduction of automation and robotics both at individual stages of production and throughout the entire technological process. In addition, it is worth introducing science-based, resource-saving and environmental technologies. Scientific and technical forecasting has been carried out, which aims to analyze the feasibility of modernizing the design of the kneading machine. A "black box" model of the dough kneading stage was formed. For a more visual structuring and assessment of the significance of the parameters under consideration, the expert assessment method was applied, the results are presented in the form of a table of ranks. The study of the characteristics influencing the dough kneading operation was performed using four different parameters, among which were input and output parameters divided into control, controlled, perturbed and observed, and the technological process of dough kneading was performed in a dough mixing machine. The most significant factors in the process of kneading dough are: the humidity and temperature of the dough, the speed of rotation of the kneading body of the kneading machine, the volume of water for kneading. In addition, the modernization of the equipment of the kneading machine seems to be a rather promising direction for improving the efficiency of the dough kneading process.
About the Author
D. V. Donya
Russian State Agrarian University - Moscow
Russian Federation
Russian Federation
Cand. Sci. (Engin.), assistant professor, technology of storage and processing of livestock products department, Timiryazevskay St., 49, Moscow, 127434, Russia
References
1. Bakirova R.R., Sagadeeva E.F., Skornyakova V.O. External risks of entrepreneurial activity of the bakery industry. Regional Problems of Economic Transformation. 2022. no. 1. pp. 52–59. (in Russian)
2. Gorky A.S. A system for assessing and forecasting the prospects for the development of regional industrial systems, taking into account the innovation and technological factor. Bulletin of the Samara University. Economics and Management. 2023. no. 3. Available at: https://cyberleninka.ru/article/n/sistema-otsenki-i-prognozirovaniya-perspektiv-razvitiya-regionalnyh-promyshlennyh-sistem-s-uchetom-innovatsionno-tehnologicheskogo (in Russian)
3. Bazrov B.M. Ensuring the manufacturability of product designs. High-tech Technologies in Mechanical Engineering. 2020. vol. 8. no. 110. pp. 18–22. doi: 10.30987/2223-4608-2020-8-18-22 (in Russian)
4. Leshkevich T.G. Metaphors of the digital age and the black box problem. Philosophy of Science and Technology. 2022. no. 1. pp. 34–48. doi: 10.21146/2413-9084-2022-27-1-34-48 (in Russian)
5. Bochkaryov P.Yu., Korolev R.D., Bokova L.G. Comprehensive Assessment of the Manufacturability of Products. Advanced Engineering Research. 2023. vol. 23. no. 2. pp. 155–168. doi: 10.23947/2687-1653-2023-23-2-155-168
6. Chernetsov A.N. Methods of technological forecasting. Science Herald. 2019. vol. 1. no. 6 (15). pp. 10–18. Available at: https://cyberleninka.ru/article/n/metody-tehnologicheskogo-prognozirovaniya (in Russian)
7. Ovinnikov V.A. The role of innovations and innovative technologies in the modernization of Russian industrial enterprises. Economics and Management of Innovations. 2021. no. 4. pp. 72–79. (in Russian)
8. Neverov E.N., Ivanov S.A., Petrova O.V. et al. Study of the process of using carbon dioxide in the tableting of instant products and dry mixtures of plant components. Bulletin of the Krasnoyarsk State Agrarian University. 2024. no. 7 (208). pp. 229–242. (in Russian)
9. Gorbachev A.S., Drogovoz P.A. Forecasting as a tool for advanced development of technological competencies in industry. Corporate Economics. 2020. no. 12. pp. 45–52. Available at: https://cyberleninka.ru/article/n/prognozirovanie-kak-instrument-operezhayuschego-razvitiya-tehnologicheskih-kompetentsiy-v-promyshlennosti (in Russian)
10. Kachanova L.S., Bondarenko A.M., Baryshnikov A.V. Economic and technological aspects of recycling organic waste in ensuring the financial sustainability of agricultural sector enterprises. Strategic planning and forecasting in the agro-industrial complex as a tool for achieving the goals of Russia's national development, 2021. pp. 83–87. (in Russian)
11. Seryakov G.N. Methodological aspects of organizing construction in the conditions of innovative economic development. Architectural and Construction Complex: Problems, Prospects, Innovations: electronic collection of articles of the II International Scientific Conference (Novopolotsk, November 28–29, 2019). Ed. by L.M. Parfenova. Novopolotsk: Polotsk State University, 2020. pp. 445–452. (in Russian)
12. Wagner L.P., Reinpold L.M., Kilthau M., Fay A. A systematic review of modeling approaches for flexible energy resources. Renewable and Sustainable Energy Reviews. 2023. vol. 184. p. 113541. doi: 10.1016/j.rser.2023.113541
13. Melgaard S.P., Jørgensen R.B., Li H. et al. Fault detection and diagnosis encyclopedia for building systems: a systematic review. Energies. 2022. vol. 15. no. 12. p. 4366. doi: 10.3390/en15124366
14. Habash R. Sustainability and health in intelligent buildings. Cambridge: Woodhead Publishing, 2022. 350 p. doi: 10.1016/B978-0-323-98826-1.00006-5
15. Hassija V., Chamola V., Mahapatra A. et al. Interpreting Black-Box Models: A Review on Explainable Artificial Intelligence. Cognitive Computation. 2024. vol. 16. pp. 45–74. doi: 10.1007/s12559-023-10179-8
16. Meleshkina E.P., Kolomiets S.N., Zhiltsova N.S. et al. Modern assessment of baking properties of Russian wheat. Bulletin of Voronezh State University of Engineering Technologies. 2021. vol. 83. no. 1. pp. 155–162. doi: 10.20914/2310-1202-2021-1-155-162 (in Russian)
17. Mickiewicz B., Britchenko I. Main trends and development forecast of bread and bakery products market. VUZF Review. 2022. vol. 7. no. 3. pp. 113–123. doi: 10.38188/2534-9228.22.3.09
18. Lutska N., Kostiuk T., Hrabovska T. et al. Monitoring and Forecasting Quality Indicators of Predough Production in the Bakery Industry. 2024 IEEE 5th KhPI Week on Advanced Technology (KhPIWeek): Proceedings. Kharkiv: IEEE, 2024. pp. 1–6. doi: 10.1109/KhPIWeek63049.2024.10696117
19. Aghababaei A., Taheri-Garavand A., Shahbazi F. et al. Artificial Intelligence in Agro-Food Systems: From Farm to Fork. Foods. 2025. vol. 14. no. 3. p. 411. doi: 10.3390/foods14030411
20. Ojo O., Adeleke O., Igbokwe U. et al. Development of dough kneading machine for small and medium-sized enterprises. Journal of Applied Research in Technology & Engineering. 2024. vol. 5. no. 1. pp. 23–31. doi: 10.4995/jarte.2024.21271
21.
Review
For citations:
Donya D.V. Forecasting the development of technological processes for the leading equipment of a wheat flour bread production line. Proceedings of the Voronezh State University of Engineering Technologies. 2025;87(4):29-35. (In Russ.) https://doi.org/10.20914/2310-1202-2025-4-29-35
Views:
17
Email this article 
Post a Comment 
