Preview

User

Not a user? Register with this site Forgot your password?

Proceedings of the Voronezh State University of Engineering Technologies

Advanced search

MATHEMATICAL MODEL OF RAW MATERIAL FLOW IN THE SCREW CHANNEL OF OIL PRESS

https://doi.org/10.20914/2310-1202-2013-3-18-22

Abstract

By means of mathematical modeling the motion of oilseeds in the screw channel was presented. There are obtained equations that allow indicate the average speed in the screw channel, as well as find the pressure in end of screw channel in front of the filtering zone.

About the Authors

V. N. Vasilenko
Воронежский государственный университет инженерных технологий
Russian Federation


M. V. Kopylov
Воронежский государственный университет инженерных технологий
Russian Federation


I. V. Dragan
Воронежский государственный университет инженерных технологий
Russian Federation


L. N. Frolova
Воронежский государственный университет инженерных технологий
Russian Federation


References

1. Berd, R. Transport phenomena [Text] / R. Berd, V. Stewart, E. Lightfoot. – M.: Himiya, 1974. – 688 p.

2. Kartashov, L.P. Parametric and structural synthesis process facilities on the basis of a systematic approach and mathematical modeling [Text] / L.P. Kartashow, T.M. Zubkov. – Ekaterinburg: Ural Branch of Russian Academy of Sciences, 2009. – 225 p.

3. Vasilenko, V.N. The study of the kinetic regularities of extraction of vegetable oils in the screw oil press [Text] / V.N. Vasilenko, M.V. Kopylov // Bulletin of VSUET. - 2012. – № 1. – P. 10-12.

4. Vasilenko, V.N. Creating a resourcesaving technologies for complex processing of personal and mass-grain material [Text] / V.N. Vasilenko, E.A. Tatarenkov, M.V. Kopylov et al // International scientific-practical conference "Modern trends in theoretical and applied research in 2010.". – 2010. - V. 5. - P. 5-7.


Review

For citations:

Vasilenko V.N., Kopylov M.V., Dragan I.V., Frolova L.N. MATHEMATICAL MODEL OF RAW MATERIAL FLOW IN THE SCREW CHANNEL OF OIL PRESS. Proceedings of the Voronezh State University of Engineering Technologies. 2013;(3):18-22. (In Russ.) https://doi.org/10.20914/2310-1202-2013-3-18-22

Views: 564


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2226-910X (Print)
ISSN 2310-1202 (Online)

FSBEE HE “Voronezh state university of engineering technologies”
Address: 19, Revolution av., 11 Voronezh 394000 Russia.
Tel.: 8 920 432 16 57
E-mail: vestnikvgta@mail.ru

Processing of personal data
supported by NEICON (Elpub lab)