Summary. The results of studies of the elastomeric compositions based on natural rubber containing curatives different ratio "curing agent : vulcanization accelerator" listed in this article. Influence of the composition of the vulcanizing group on stress-strain and elastic- deformation properties of tire tread rubber was installed. It has been shown that a significant effect on thermo-oxidative aging of vulcanizates was the composition of the vulcanizing group. Results of studies resistance tread rubber to exposure to elevated temperatures were presented . Vulcanizates differing type and density by varying the cross-linking ratio of "curing agent : vulcanization accelerator" were obtained . Research results in the formation of rubber resistance and crack growth at different temperatures were presented. Revealed that the best education and resistance to tear propagation under normal conditions characterized by rubber ratio "curing agent : vulcanization accelerator" equal to 1.5:1. It has been established that a dynamic endurance study rubbers depends largely on the nature and concentration of the cross-linking cross-links and movable promote increase efficiency due to the grid and reduce the sulfidity rearrangement. During loading mode alternating deformations at elevated temperatures lability of polysulfide bonds negatively affects the performance of rubber, and the decisive role of providing strength and thermal cross-linking. It is shown that the performance of the spatial grid rubbers allow indirectly judge the dynamic vulcanizates endurance and predict performance rubbers at elevated temperatures under conditions of repeated cyclic deformation. Revealed that the vulcanizing system containing sulfur and vulcanization accelerator TBBS 1:2, promotes the formation of the optimal structure of vulcanized rubber , which provides the best resistance to repeated cyclic deformations in the operating temperatures of the tire.

vulcanizing group, tire rubber, structure of vulcanizate

1. Корнев А. Е., Буканов А. М., Шевердяев О.Н. Технология эластомерных материалов. М.: НППА «Истек», 2009. 500 с. Kornev А. Е, Bukanov A. M., Sheverdiaev O.N. Tekhnologiia elastomernykh materialov [Technology of elastomeric materials]. Moscow, NPPA "Istek", 2009. 500 p. (In Russ.).

2. Пичугин А. М. Материаловедческие аспекты создания шинных резин. М.: Машино- строение, 2008. 383 с. Pichugin, A. M. Materialovedcheskie aspekty sozdaniia shin [Materials research aspects of creation tire rubbers]. Moscow, Mashinostroenie, 2008. 383 p. (In Russ.).

3. Жовнер Н. А. и др. Структура и свойства материалов на основе эластомеров: учеб. пособие. Омск: Филиал РосЗИТЛП, 2003. 276 с. Zhovner, N. A. et al Struktura i svoistva materialov na osnove elastomerov [Structure and properties of materials on the basis of elastoplastics]. – Omsk, Filial RusZITLP, 2003. 276 p. (In Russ.).

4. Овчаров В. И., Бурмистр М. В., Тютин В. А. Свойства резиновых смесей и резин: оценка, регулирование, стабилизация. М.: САНТ-ТМ, 2001. 400 с. Ovcharov V. I., Burmistr M. V., Tiutin V. A. Svoistva rezinovykh smesei i razin: otsenka, regulirovanie, stabilizatsiia [Properties of rubber compounds and rubber: assessment, regulation, stabilization]. Moscow, SANT-TM, 2001. 400 p. (In Russ.).

5. Гришин Б. С. Материалы резиновой промышленности (информационно-аналитическая база данных). Казань: Казан. гос. технолог. ун-т, 2010. 506 с. Grishin B. S. Materialy rezinivoi promyshlennosti (infomatsionno-analiticheskaia baza dannykh) [Materials of rubber industry (an informational and analytical database)]. Kazan, KSTU, 2010. 506 p. (In Russ.).