Preview

Proceedings of the Voronezh State University of Engineering Technologies

Advanced search

THE LINE FOR PRODUCTION OF DRIED APPLES, PEARS, CARROTS, PUMPKIN AND CHIPS

https://doi.org/10.20914/2310-1202-2015-4-28-31

Abstract

The line is intended for processing of fruit and vegetable raw materials and receiving dried apples, pears, carrots, pumpkins and the fruit-and-vegetable of chips. The line solves problems of improvement of quality of a ready-made product and thermal production efficiency due to more rational alternation of the technological modes of a moisture increment and dehumidification with high extent of use of an energy potential of the heat carrier, use of the inert heat carrier (steam) identical by the form for technological thermal processes, decrease in specific energy consumption and metal consumption, and also an intensification of moisture evaporation and creation of the compact multipurpose technological line for production of fruit and vegetable products with the expanded range. The technological production line of dried apples, pears, carrots, pumpkin and fruit and vegetable chips contains the jet washer, the inspection conveyor, the size grader, the car for removal of a seed nest and the device are sharp fruits and vegetables on plates, the sulfiter, the dryer and the packing automatic packing machine. Thus the line contains the combined toroidal device for heatmoisture of handling continuous action divided into sections: section of heating of raw materials, section of convective drying, section of preliminary hydration, which is located between microwave drying sections, and the section of cooling of the dried-up product intended for bringing a product to final readiness. The equipment complex from the drum car with the washing block and multipurpose installation with crushing of raw materials and office of sunflower seeds taking into account raw materials type is provided in lines. Are used recirculation a contour, the heating of the initial raw material fulfilled after drying of pairs and a condensate in the closed contour for creation energy-saving of the "know-how" of a ready product. The line represents modular blocks and is recustomized depending on a type of the received dried apples, pears, pumpkins or the fruit-and-vegetable of chips on the basis of the developed resource-saving scheme and the combined convection-microwave-drying drying of raw material.

About the Authors

G. V. Kalashnikov
Voronezh state university of engineering technologies
Russian Federation
Department of machines and devices of food manufactures, Professor


E. V. Litvinov
Voronezh state university of engineering technologies
Russian Federation
Department of machines and devices of food manufactures, associate professor


References

1. 1 Kalashnikov G.V., Litvinov E.V. Thermal analysis of the resource-saving technologу of fruit chips manufacture. Vestnik VGUITT. [Proceedings of VSUET], 2014, no. 4, pp. 12-16. (In Russ.)

2. 2 Коrolev А.А. Application of the combined power supply in technologies of drying of vegetable raw materials. Khranenie i pererabotka sel'khozsyr'ya. [Storage and processing of agricultural raw materials], 2012, no. 11, pp. 55-56. (In Russ.)

3. 3 Kalashnikov G.V., Litvinov E.V. Microwave drying kinetics of apples. Vestnik VGUITT. [Proceedings of VSUET], 2012, no. 2, pp. 40-42. (In Russ.).

4. Huang Lue-lue, Zhang Min, Wang Li-ping, Mujumdar Arun S. et al. Influence of combination drying methods on composition, texture, aroma and microstructure of apple slices. LWT - Food Sci. and Technol, 2012, vol. 47, no.1, pp. 183-188.

5. 5 Kalashnikov G.V., Litvinov E.V. Liniya dlya proizvodstva plodoovoshchnykh chipsov [Line for the production of fruit and vegetable crisps]. Patent RF, no. 2485803, 2013. (In Russ.).


Review

For citations:


Kalashnikov G.V., Litvinov E.V. THE LINE FOR PRODUCTION OF DRIED APPLES, PEARS, CARROTS, PUMPKIN AND CHIPS. Proceedings of the Voronezh State University of Engineering Technologies. 2015;(4):28-31. (In Russ.) https://doi.org/10.20914/2310-1202-2015-4-28-31

Views: 733


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2226-910X (Print)
ISSN 2310-1202 (Online)