The most effective safety management system of food production in all industrialized countries in the world recognized by the system based on the principles of HACCP. In Russia, the conformity assessment carried out by the HACCP system certification. The essence of the HACCP system is to identify and control the critical points. Critical Control Point – this is the stage of the process, which is subject to control for hazard identification and risk management in order to avoid the production of unsafe products. Implementation of HACCP system allows to tighten and coordinate the quality control system, which will improve the competitiveness of the products produced in the sugar market in Russia and abroad. In the early stages of food production HACCP system to prevent the occurrence of danger. It is based on the preventive approach to ensuring quality and safety in the production process, and can also be used in the development of new products. HACCP system is based on seven main principles to ensure the implementation and management of the system in production. 1. Creation of a working group of the coordinator and the technical secretary and various consultants. 2. Information on materials and products, in this case of sugar beet and sugar. 3. Information about the production. 4. Risk analysis of the available chemical, physical and microbiological factors. To determine the critical control points according to the results obtained for each factor is determined by a special chart the extent of its accounting. The need to consider the potential hazard is determined by the order in which area it has got. 5. The production program of mandatory preliminary activities in the production of sugar. 6. Determination of critical control points. 7. Making worksheets HACCP. It is shown that the use of HACCP in sugar beet production has several advantages.

HACCP, Critical Control Point, the safety of products, beet-sugar production

1. Posledova Yu. I., Gromkovsky A.I., Zharikova N.N. The introduction of safety management systems at the sugar industry. Ekonomika. Innovatsii. Upravlenie kachestvom [Economy. Innovation. Quality control]. 2013, no. 4 (5), pp. 112. (In Russ.).

2. GOST R 52647–2006. Svekla saharnaya. Tehnicheskie usloviya [Beet sugar. Technical conditions]. Moscow, Standartinform Publ., 2008. 6 p. (In Russ.).

3. GOST 30090–93. Meshki i meshochnyie tkani. Obschie tehnicheskie usloviya. [Sacks and fabric for bads. General specifications]. Minsk, Izdatel’stvo standartov publ., 1994. 30 p. (In Russ.).

4. GOST 19360–74. Meshki-vkladyishi plenochnyie. Obschie tehnicheskie usloviya. [Film liner-bags. General specifications]. Moscow, Izdatel’stvo standartov publ., 1974. 7 p. (In Russ.).

5. GOST 23285–78. Paketyi na ploskih poddonah. Produktyi i steklyannaya tara. Tehnicheskie usloviya [Transportation packages for food products and glass containers. Specifications]. Moscow, Izdatel’stvo standartov publ., 1978. 11 p. (In Russ.).

6. GOST 2226–2013. Meshki iz bumagi i kombinirovannyih materialov. Obschie tehnicheskie usloviya [Bags made of paper and composite materials. General specifications] Moscow, Standartinform Publ., 2013. 37 p. (In Russ.).

7. The effectiveness of the final stages of juice purification / V.A. Golybin [and other] // Sugar. [Sahar]. 2012, no. 9, pp. 30–33. (In Russ.).

8. GOST 21–94. Sahar-pesok. Tehnicheskie usloviya [Granulated sugar. Specification] Moscow, Izdatel’stvo standartov publ., 1978. 13 p. (In Russ.).

9. GOST 18477–79. Konteyneryi universalnyie. Tipyi, osnovnyie parametryi i razmeryi [Universal containers. Types, basic parameters and dimensions] Moscow, Izdatel’stvo standartov publ., 1979. 12 p. (In Russ.).

10. GOST 24597–81. Paketyi tarnoshtuchnyih gruzov. Osnovnyie parametryi i razmeryi [Unitized tared and piece goods cargoes. Main parameters and dimensions] Moscow, Izdatel’stvo standartov publ., 1981. 3 p. (In Russ.).

11. GOST 26663–85. Paketyi transportnyie. Formirovanie s primeneniem sredstv paketirovaniya. Obschie tehnicheskie trebovaniya [Transport packets. Formation by packaging means. General technical requirements] Moscow, Izdatel’stvo standartov publ., 1981. 7 p. (In Russ.).