Preview

Proceedings of the Voronezh State University of Engineering Technologies

Advanced search

The nfluence of microparticulate on acid coagulation of milk proteins in curd manufacture

https://doi.org/10.20914/2310-1202-2016-3-164-169

Abstract

One of the important trends of whey processing is the modification of its composition and properties for the applications in curd technology. Modification of whey composition and properties included ultrafiltration concentration and subsequent microparticulation of the concentrate obtained. Selected modes allowed to obtain particles of microparticulate of whey proteins similar to fat globules in shape and size. Whey proteins microparticulate was proposed to use in curd technology. The influence of mass fraction of whey proteins microparticulate on the process of fermentation and acid clot formation in the production of low-fat curd was investigated. The most intensive growth and titratable and active acidity was observed in samples of curd clots with a mass fraction of whey proteins microparticulate from 10 to 15%. The analysis of organoleptic characteristics of curd clots led to the conclusion that the introduction _ of whey proteins microparticulate gives a smooth appearance to the clot, increases the density, adds a creamy taste. In the process of self-pressing _ of whey proteins microparticulate particles embedded inside impede the process of densification, and the mass fraction of moisture in the curd increases. Application _ of whey proteins microparticulate intensifies the process of curd clot formation and increases the yield of the finished product by 20 - 30%. Application of whey proteins microparticulate for enrichment of normalized mixture in the production of curd allows to expand the range of low-calorie protein products contributes to the intensification of the process of ripening of enriched normalized mixture, increases the yield of curd and its biological value.

About the Authors

A. N. Ponomarev
Voronezh state university of engineering technologies, Revolution Av., 19 Voronezh, Russia
Russian Federation
doctor of technical science, head of Department of technology of animal products


E. I. Melnikova
Voronezh state university of engineering technologies, Revolution Av., 19 Voronezh, Russia
Russian Federation
doctor of technical science, Professor of Department of technology of animal products


E. B. Stanislavskaia
Voronezh state university of engineering technologies, Revolution Av., 19 Voronezh, Russia
Russian Federation
candidate of technical science, associate professor of Department of technology of animal products


E. G. Korotkov
OAO Dairy plant "Voronezh", Voronezh, St. 45 Infantry Division, d. 259.
Russian Federation
leading specialist Otter


References

1. Храмцов А.Г. Новации молочной сыворотки. СПб.: ИД Профессия, 2016. 490 с.

2. Дымар О.В. Технологические аспекты использования микропартикулятов сывороточных белков при производстве молочных продуктов // Молочная промышленность. 2014. № 6. С. 19–21.

3. Лосев А.Н., Пономарев А.Н., Мельникова Е.И., Станиславская Е.Б. Микропартикуляция творожной сыворотки // Молочная промышленность. 2015. № 9. С. 42–43.

4. Bayoumi H.M., Mohamed A.G., Sheikh M.M.E., Farrag A.F. et al. Effect of ultrafiltration permeates on the quality of chocolate milk // Journal of American Science. 2011. V. 7. № 7. P. 609–615.

5. Hurley W.L. Milk protein // Rijeka, Croatia: InTech. 2012. V. 1. 352 p.

6. Лосев А.Н., Мельникова Е.И., Станиславская Е.Б., Коротков Е.Г. Творог с микропартикулятом сывороточных белков // Молочная промышленность. 2016. № 1. С. 36–38.


Review

For citations:


Ponomarev A.N., Melnikova E.I., Stanislavskaia E.B., Korotkov E.G. The nfluence of microparticulate on acid coagulation of milk proteins in curd manufacture. Proceedings of the Voronezh State University of Engineering Technologies. 2016;(3):164-169. (In Russ.) https://doi.org/10.20914/2310-1202-2016-3-164-169

Views: 975


Creative Commons License
This work is licensed under a Creative Commons Attribution 4.0 License.


ISSN 2226-910X (Print)
ISSN 2310-1202 (Online)