Use of whey protein ingredients to produce milk fat simulants
https://doi.org/10.20914/2310-1202-2020-3-90-95
Abstract
The article deals with the problem of thermomechanical processing conditions influence on the properties of dry whey protein ingredient solutions: whey protein concentrates and isolates. The initial stage of obtaining fat property mimics is heat treatment of protein solutions to the temperature exceeding the denaturation threshold (65-75 °C). The next mechanical impact on the aggregates obtained leads to the formation of the particles similar to the fat globules. Protein mass fraction has a significant influence on the denaturation process. When its value becomes larger, the number of collisions between primary aggregates increases as well as the coagulation probability. In isolate solutions the denaturation rate was high, and it was observed intensive, irreversible coagulation at all protein concentrations. Aggregates were characterized as porous, branched, and polydisperse. Shear rate increase under mechanical impact resulted in even greater aggregates growth. Samples obtained at high shear rates were characterized by apparent physical instability. Large size of the protein aggregates was confirmed by a high degree of sedimentation. Suspensions were characterized as granular. The denaturation rate and coagulation intensity were lower in concentrate solutions. Presence of lactose helped to protect proteins from rapid loss of solubility by stabilizing their structure against thermal unfolding. The aggregates were characterized by a round compact shape, and the particle size didn’t differ a lot. Protein mass fraction change of the concentrate suspension samples did not have significant influence on the aggregates size and shape. Rotor rotation speed increase contributed to the particle size decrease. The solutions were characterized by the sedimentation stability and they had a uniform thick consistency imitating properties of the fat-containing products.
About the Authors
E. I. Melnikova
Voronezh State University of Engineering Technologies
Russian Federation
Dr. Sci. (Engin.), professor, technology of animal food products department, Revolution Av., 19, Voronezh, 394036, Russia
Russian Federation
Dr. Sci. (Engin.), professor, technology of animal food products department, Revolution Av., 19, Voronezh, 394036, Russia
E. B. Stanislavskaia
Voronezh State University of Engineering Technologies
Dr. Sci. (Engin.), professor, technology of animal food products department, Revolution Av., 19 Voronezh, 394036, Russia
Dr. Sci. (Engin.), professor, technology of animal food products department, Revolution Av., 19 Voronezh, 394036, Russia
K. Y. Baranova
Voronezh State University of Engineering Technologies
student, technology of animal food products department, Revolution Av., 19 Voronezh, 394036, Russia
student, technology of animal food products department, Revolution Av., 19 Voronezh, 394036, Russia
References
1. Talha A., Rana M.A., Haassan A., Ubaid ur R. et al. Treatment and utilization of dairy industrial waste: A review. Trends in Food Science & Technology. 2019. no. 88. pp. 361–372. doi: 10.1016/j.tifs.2019.04.003
2. Volodin D.N., Gridin A.S., Evdokimov I.A. Keeping the most valuable. Dairy industry. 2019. no. 1. pp. 48-49. (in Russian).
3. Zolotareva M.S., Volodin D.N., Evdokimov I.A., Kharitonov V.D. Membrane technologies for ensuring the efficiency and safety of dairy production. Dairy industry. 2018. no. 5. pp. 36-39. (in Russian).
4. Khramtsov A.G. Innovations of milk whey. Saint Petersburg, Professiya, 2016. 490 p. (in Russian).
5. Smithers G.W. Whey-ing up the options – Yesterday, today and tomorrow. International Dairy Journal. 2015. no. 48. pp. 2-14. doi: 10.1016/j.idairyj.2015.01.011
6. de Castro R.J.S., Domingues M.A.F., Ohara A., Okuro P.K. et al. Whey protein as a key component in food systems: Physicochemical properties, production technologies and applications. Food Structure. 2017. no. 14. pp. 17–29. doi: 10.1016/j.foostr.2017.05.004
7. Wen-qiong W., Yun-chao W., Xiao-feng Z., Rui-xia G. et al. Whey protein membrane processing methods and membrane fouling mechanism analysis. Food Chemistry. 2019. no. 289. pp. 468-481. doi: 10.1016/j.foodchem.2019.03.086
8. Olivares M.L., Shahrivar K., de Vicente J. Soft lubrication characteristics of microparticulated whey proteins used as fat replacers in dairy systems. Journal of Food Engineering. 2019. no. 245. pp. 157–165. doi: 10.1016/j.jfoodeng.2018.10.015
9. Torres I.C., Mutaf G., Larsen F.H., Ipsen R. Effect of hydration of microparticulated whey protein ingredients on their gelling behaviour in a non-fat milk system. Journal of Food Engineering. 2016. no. 184. pp. 31–37. doi: 10.1016/j.jfoodeng.2016.03.018
10. Gorbatova K.K. Biochemistry of milk and dairy products. Saint Petersburg, GIORD, 2015. 336 p. (in Russian).
11. Melnikova E.I., Losev A.N., Stanislavskaya E.B., Korotkov E.G. Cottage cheese with whey protein microparticulate. Dairy industry. 2016. no. 1. pp. 31 - 33. (in Russian).
12. Melnikova E.I., Stanislavskaia E.B., Losev A.N. Microparticulation of Caseic Whey to Use in Fermented Milk Production. Foods and Raw Materials. 2017. no. 5(2). pp. 83 – 93.
13. Tikhomirova N.A., Komolova G.S., Ionova I.I. Biologically active proteins of milk. Moscow, MGUPB. 2004. 80 p. (in Russian).
14. Gun'kova P.I., Gorbatova K.K. Biotechnological properties of milk proteins. Saint Petersburg, GIORD. 2015. 216 p. (in Russian).
15. Gelfman M.I., Kovalevich O.V., Yustratov V.P. Colloid chemistry. Saint Petersburg, Lan. 2020. 336 p. (in Russian).
Review
For citations:
Melnikova E.I., Stanislavskaia E.B., Baranova K.Y. Use of whey protein ingredients to produce milk fat simulants. Proceedings of the Voronezh State University of Engineering Technologies. 2020;82(3):90-95. (In Russ.) https://doi.org/10.20914/2310-1202-2020-3-90-95
Views:
456
Email this article 
Post a Comment 
