The article considered the influence of the heat consumers distribution and the flashing vapours effect juice for multipleevaporator sugar factory on the consumption the main production flow of heat transfer agent – water vapor. The problem of rational distribution of heat transfer agent for of the corps multiple-evaporator is relevant from point of view of energy saving and energysaving heat of the sugar factory. The solution to this problem is advantageously carried out on the basis of quantitative mathematical description of the distribution of vapor on the corps of the evaporation plant. The heat consumers distribution should be based on technical and economic calculation. To solve this problem it is advisable to use a single equation that determines the dependence of the steam flow in the first unit evaporator on the amount of evaporated water and the method of heat consumers distribution for housing. Evaporators sugar factory has two functions – technology and heat, each of which is described by its equation. On the basis of the material and heat balance equations for the realization of the basic functions of the system evaporator written multipleevaporator equations. The solution of this system allows you to obtain the equation of the steam flow and the amount of evaporated water, taking into account the flashing vapours effect. Solution of the system should take into account the accepted design standards of sugar factories. As a result of solving the system of equation is obtained, which allows you to organize and optimize the heat consumers distribution of the corps evaporator. The equation can be used for any number of units evaporator. This equation allows you to assess the efficiency of the evaporation plant of a sugar factory. This is of great practical importance in the modernization of thermal schemes of sugar factories.

sugar production, evaporation plant, modeling, thermal scheme of sugar factory, heat consumers distribution on the evaporation plant corps

1. Vedomstvennye normy tekhnologicheskogo proektirovaniya sveklosakharnykh zavodov VNTP03-85 [Departmental rules of technological design beet sugar factories VNTP 03 – 85] Moscow, Minpischeprom USSR, 1985. 208 p. (in Russian).

2. Gromkovskii A.I., Gromkovskii A.A. Distribution of the heat consumers buildings evaporator sugar factory. Sakhar [Sugar] 2015, no. 8, pp. 28–31. (in Russian).

3. Gromkovskii A.I., Gromkovskii A.A. Evaluation of the evaporator sugar factory on the specific steam consumption. Sakhar [Sugar] 2015, no. 11, pp. 36–38. (in Russian).

4. Zelepukin Yu.I., Golybin V.A., Tkachev A.A. Modern technologies for the production of beet sugar. Pishchevaya promyshlennost’ [Food Industry] 2012, no. 3, pp. 52–53. (in Russian).

5. Instruktsiya po normirovaniyu raskhoda teplovoi energii v proizvodstve sakhara-peska iz sakharnoi svekly [Instructions on rationing of thermal energy consumption in the production of sugar from sugar beet (sugar beet processing, output and processing of sugar syrup)] Kiev, VNIISP, 1983. 139 p. (in Russian).

6. Kolesnikov V.A., Nechayev Yu.G. Teplosilovoe khozyaistvo sakharnykh zavodov [Heat-power economy of sugar factories] Moscow, Pishchvaya promyshlennost’, 1980. 392 p. (in Russian).

7. Razladin Yu.S., Razladin S.Yu. Spravochnoe posobie inzhenera-teploenergetika [Handbook heating energy engineer sugar production] Kiev, Shcheki Khoriv, 2006. 407 p. (in Russian).

8. Sapronov A.R., Sapronova L.A., Ermolaev S.V. Tekhnologiya sakhara [Sugar technology] SaintPetersburg, Professiya, 2013, 296 p. (in Russian).

9. Chernobylskii I.I. Vyparnye ustanovki [Evaporation plants] Kiev, Vishcha shkola, 1970. 240 p. (in Russian).

10. Shtangeev K.O. Ratsionalizatsiya teploispol’zovaniya v sveklosakharnoi promyshlennosti [Rationalization the use of heat in the sugar beet industry] Moscow, 2005. 68 p. (in Russian).